Ken's House
Carpenter Ken
answers your questions
Home Questions and Answers How To's Picture Gallery Contact


Hot Tub Deck Project 8
 
Previous     Next

Step Eight: A pair of "store doors" was installed to allow easy access to the deck and hot tub. Since a window was removed where the door went in, no new header had to be put in the wall framing. I just had to remove the window, cut out the wall below and put the pre-hung doors into the hole.

When installing an exterior door, it is important to seal or paint it completely. Be sure to get both faces at the same time and all edges (top, bottom, and sides). Because of the differences in temperature and humidity between the interior of a house and the exterior, wood doors will warp if they are not properly sealed.

If you want to have an exterior door swing out, be sure to use NRP (stands for None Removable Pin and is sometimes referred to as "nerp") hinges. This type of hinge has a set screw that can only be removed when the door is open. While the set screw is in place, the bad guys can't remove the hinge pins to break in.

Ask CarpenterKen Terms of Use About © 2006 Ken Bryan